Ego Power+ FN1800 Manual Del Usuario página 22

NOTICE: When the misting operation is finished, pull the intake tube out of the water
and run the fan in misting mode until all the water clears from the tube. This helps
prevent the residual water in the tube from causing unexpected misting when the fan is
started again.
USING THE FAN WITHOUT MISTING
If desired, this product may be used as a fan only, when not connected to a water
source. When not in use, always place the intake tube in its storage area (See section
"STORAGE" in this manual) to protect it from damage and contamination.
INTERNAL PROTECTION
When the misting function is activated but no water mist is coming out:
◾
The water pump will keep running for approx. 90s, and then stop automatically to
protect internal electronics.
◾
Depending on misting mode, the misting indicator will display one or two solid
green lights for approx. 90s, and then flash two green lights continuously as an
alert for the operator to:
a. Check if the intake tube is properly immersed into water.
b. Check if the misting nozzle(s) is clogged, and clean according to the "NOZZLE
MAINTENANCE" chapter.
c. Press the misting mode selection button to restart misting.
22
56V LITHIUM-ION CORDLESS MISTING FAN — FN1800/FN1800-FC