Publicidad
STEP 3
Attach the swivel ironing board to
the soft-close/swivel mechanism
using (6) M5 x15mm euro screws
(See Figure 3).
PZ2
#2
#2
STEP 4
From the closed position, grab
the end of the soft close/ swivel
mechanism and pull the whole unit
outward (See Figure 4A).
Rotate the board 90 degrees (See
Figure 4B).
Grab the side of the board and
gently pull down. DO NOT grab
the metal legs to extend the
ironing board down. The legs will
extend outward toward the floor
(See Figure 4C).
With an adjustable wrench, adjust
both ironing board feet to fit
tightly against the floor.
Note: The board should not
move if tightened correctly.
To close, gently push upward on
the ironing board until the soft-
close engages and returns the
ironing board back into place (See
Figure 4D).
FIG. 3
FIG. 4A
FIG. 4B
FIG. 4C
3
Publicidad
