Publicidad
STEP 1
Begin by removing the slides from
the (2) baskets by pressing the
black release triggers on both
sides of the basket (See Figure A).
STEP 2
Attach the pair of bottom slides
to the bottom hole position of the
U-shaped support bracket using
(8) of the provided machine screws
(See Figure B).
Note: start with the circular hole
first and then proceed to the
slotted hole.
#2
#2
#2
2
FIG. A
FIG. B
Customer Service: 800-626-1126 | rev-a-shelf.com
Publicidad
