Product Specifications; Unpacking - Delta 37-071 Manual De Instrucciones

Weight
Overall Dimensions (L x W x H)
Table Dimensions (L x W)
Motor
Maximum Width of Cut
Maximum Depth of Cut
Number of Knives
Cuts per Minute
Fence Length
Fence Height
Fence Angle
Cutterhead Diameter
Cutterhead Speed
Compare all parts to the list below and check that all parts are present and in good condition. Report any missing
or damaged parts to your distributor or dealer. Prior to tool assembly and use, read this manual thoroughly to
familiarize yourself with proper assembly, maintenance and safety procedures.
DESCRIPTION (QUANTITY)
1. 37-071 6" Jointer (1)
2. Fence
3. Rear Fence Support (1)
4. Rear Fence Bracket (1)
5. Dovetail Clamp (1)
6. Indexing Handle (1)
7. Fence Mounting Plate (1)
8. Fence Angle Lock (1)
9. 45°/90° Angle Stop (1)
10. Hardware Package (1)
11. 4 mm Hex Wrench (1)
12. 6 mm Hex Wrench (1)
13. Push Blocks (2)
14. Dust Chute (1)
15. Operator's Manual (not shown)
CONTENTS OF
HARDWARE PACK
• M8 x 16mm Hex Head Screws (4)
• M8 x 20mm Hex Head Screws (2)
• 8mm Lock Washers (6)

PRODUCT SPECIFICATIONS

UNPACKING

76 lbs
26 x 8 x 10 in.
28-1/2 in. x 6-¼ in.
12 amps
120V
Single-Phase
60 Hz
6 in.
1/8 in.
2
20,000
22-7/8 in.
4-5/16 in.
45°, 90° and 135°
1-7/8 in.
10,000 RPM
8