Installation Precautions - THOMSON 32WS95EF Manual De Instrucciones

ACC908-17L.qxd 21/02/02 18:43

Installation precautions

Handling the screen
• We recommend that your distributor carries
out its assembly.
• If you decide to mount the system yourself,
obtain the assistance of two other persons.
• Take care not to strike the screen. A shock
may break it and provoke injury.
Solidity of the wall
Before carrying out the installation, check
that the wall is able to support the weight of
the screen and its wall mount over a long
period of time. The ensemble weighs
approximately 30-35 kg.
• Take care that the holes used for fastening the
wall mount to the wall are drilled in the most
solid part of the wall.
• Take care since many wall decoration
materials give the impression that a wall
behind them is more solid than it is in reality.
• To fix the wall mount to a concrete wall or
breezeblock wall, use the correct fixing
system that is recommended for the particular
material. Consult specialist sales staff in a do-
it-yourself store when purchasing such fittings.
• When fitting the wall mount, take care that you
use all the bolts and parts supplied and
mentioned in these installation instructions.
Installation example
(bolts not supplied)
Location of the screen
In order to avoid any malfunction, risk of
electrical shock, fire, injury or material damage,
take the following precautions:
Page 9
All manuals and user guides at all-guides.com
Beam
• Check that the installation once mounted will
not hinder the closing of a door or get in the
way of furniture. Do not install it in locations
subject to vibrations or high loads since this
may result in the screen falling.
• Do not install the wall mount in a bathroom,
outdoors, close to a window or any location
where water may come into contact with the
screen. Protect the screen from all sources of
dampness and heat.
• Do not install the screen close to an air vent or
the output of an air conditioner, nor in dusty or
smoky environments.
• Do not install the wall mount on a ceiling nor
on any surface sloping at a sharp angle.
Check that there is a space between the
screen and the wall. A distance of 6 cm
minimum is required for the correct ventilation
of the screen. Take care that the screen
ventilation slots are not blocked in any way.
High screen temperatures can provoke
malfunctions and in certain cases increase fire
risks.
• Do not install the wall mount close to fire
detection or sprinkler systems.
Before installing
• Check that the cables used for the connection
are of the correct type and that they are
sufficiently long. Making connections is more
difficult once the mount has been installed.
During installation
In order to avoid the possibility of dropping the
screen either during or after installation take
care to follow these instructions:
• When mounting the screen on its tilting
support, check that the screen retainer bars
are correctly slotted into the lugs on the wall
mount arms. During this operation take care
not to pinch fingers between the retaining bar
and the wall mount arm.
• Once the screen has been put in place, check
that you have correctly fixed and tightened all
the bolts.
• Do not modify any of the components in any
way. Do not use any components that are
damaged.
• Use all the bolts and components supplied in
the kit and follow the instructions carefully.
After installation
• Do not hang from the screen mount once it
has been fixed to the wall. It may come loose
and injure you. Take particular care with
regards to children.
9
EN
EN