Monitor Audio IWS-10 Manual Del Producto Y De Instalación página 2

prior to Fitting the iWs-10
CAUTION: The IWS-10 can only be fixed into plasterboard (dry-lined) walls with a thickness of up to 40mm (1
Solid wall installation will require channeling out and frame work constructed to provide a structure for the Tri Grip
dog legs to clamp to. Alternatively, the IWB-10 IIn Wal Sub-woofer back box) can be used. For safety reasons, if
you are unsure of your ability to provide a secure and safe fixing, do not attempt to fix these speakers, please obtain
the services of a competent and qualified trades person.
CAUTION: Ensure that there are no water pipes or electricity cables running within the wall structure before cutting
the speaker apertures. Work from secure steps and avoid trailing wires.
specifications
Frequency Response
Impedance (nominal)
Sensitivity (1W@1M)
Maximum SPL
(Partnered with SA-250)
Power Handling
Cut-out hole Diameter
Mounting Depth
Fixing type
Cable Connection
Construction Material
Weight
IWS-10
28Hz – 120Hz (when mounted in
optimum enclosure)
8 Ohms
86dB
Single unit; 109.8dB
Pair; 115.8dB
150 W
280mm (11")
89.98mm. (3.5")
4 position Tri-Grip® fixings
Gold plated 'push' type terminals
Mineral filled ABS (ROHS compliant)
3.8Kg (8lb 6oz)
").
1/2
®