Turbo Function; General Maintenance - Vaporetto PRO 95_TURBO FLEXI Manual De Instrucciones

12. TURBO FUNCTION

For the PRO 95_TURBO FLEXI model only
When the TURBO function is active, the appliance adjusts to
the ideal steam pressure to remove the most stubborn dirt.
To activate the function, press the Turbo (18) button and wait
for the "steam ready" indicator light ( ) to turn off.
To deactivate the Turbo function, press the Turbo button again.

13. GENERAL MAINTENANCE

Before carrying out any maintenance on the device, always
unplug it from the power mains making sure that the product
has cooled down before proceeding.
To clean the outside of the appliance, use only a damp cloth
and tap water. All accessories can be cleaned using running
water, ensuring they are completely dry before the next use.
Do not use detergents of any type.
After using the brushes, we recommend letting the bristles cool
down in their natural position, in order to avoid any
deformation.
Periodically check the status of the coloured seal located in the
built-in socket and the connection seals of the extension tubes
and the steam hose. If necessary, replace with the
corresponding spare part, as described below.
- Remove the damaged seal.
- Insert the new seal, attaching it on the
steam nozzle and pushing it into place.
- Lubricate the gasket with silicone grease
or Vaseline, or alternatively with small
quantities of vegetable oils.
14. KALSTOP
Kalstop is the anti-limescale product for appliances with boiler
for ironing and steam cleaning.
Regular use of Kalstop, every time the tank is filled with water:
- Extends the life of the appliance.
- Allows emission of a "drier" steam
- Prevents limescale build up.
- Protects the walls of the boiler.
- Contributes to saving energy.
HOW TO USE KALSTOP
14.1 Dilute one phial in 5 litres of water before putting it in the
tank.
14.2 Fill the tank as described in section 1.
14.3 Proceed with the normal cleaning operations.
Kalstop (PAEU0094) is sold in packages of 20 phials at
household appliance stores, at Polti authorized service centres
and at www.polti.com .
All manuals and user guides at all-guides.com
15. STORAGE
15.1 Turn off the appliance and disconnect from the mains
electricity.
15.2 Wait for the appliance to cool down completely before
storing it.
15.3 The hoses, brush and flexible hose can be housed on the
body of the appliance, sliding the hook on the floor brush into
the parking system on the appliance (19).
15.4 The extension tubes can be returned to in the special tube
holder compartment (20).
15.5 The small accessories can be placed in the accessories
compartment. To open the compartment, press gently on the
word "PUSH" (near the bottom of the lid), and open it (21).
| 26 |