Remington Supercare PRO 2100 Manual Del Usuario página 4

ENGLISH
• Keep the power plug and cord away from heated surfaces.
• Do not leave the appliance unattended while plugged in.
• Do not place the appliance on any soft furnishings.
• Do not use attachments other than those we supply.
• Do not set the appliance down while still on.
• Do not twist or kink the cable, or wrap it round the appliance.
• Do not use the appliance if it is damaged or malfunctions.
• Check the cord regularly for any sign damage.
• This appliance is not intended for commercial or salon use.
PARTS
1. Ceramic grille
2. Removable easy clean rear grille
3. Hang up loop
4. Slim styling accessory
INSTRUCTIONS FOR USE
• Wash and condition your hair as normal.
• Squeeze out excess moisture with a towel and comb through.
• Hairsprays contain flammable material – do not use while using this product.
• Attach the accessory by fitting it to the front of the hairdryer and twisting clockwise to
lock it in place. Take care when you do this because the attachments can become hot
during use.
1. Plug the product into the mains power supply.
2. Switch your hairdryer on and select the desired speed setting (low F or high E) using
the speed selector switch.
3. Select the desired heat setting (cool shot J, Supercare heat setting I, or high P)
using the heat selector switch.
4. After use, turn the appliance off and unplug it.
5. Let the appliance cool down before cleaning or storing away.
Using the Supercare heat setting
• The Supercare setting allows you to dry your hair quickly at a healthy heat.
• To activate select the Supercare setting (I) using the heat selector switch.
4
Controls:
J, I, P Heat selector switch
F , E Speed selector switch