Axis Communications Q8752-E Manual Del Usuario página 19

4. Remove the protective cover.
5. Apply power to the product.
Remove top cover
CAUTION
Risk of injury. Moving parts. Keep your body parts away from the product when in
operation. Disconnect from power supply before installing or performing maintenance
on the product.
CAUTION
Risk of injury. Hot surface. Do not touch the product when in operation. Disconnect
from power supply and allow the surfaces to cool before performing maintenance on
the product.
NO NO NO TICE TICE TICE
When you remove the top cover you expose parts of the visual camera that are sensitive
to impact. Make sure you don't hit the unprotected camera with the top cover when
you remove it.
To insert an SD card or reset to factory default, remove the top cover:
AXIS Q8752-E Bispectral PTZ Camera
19
EN