Dell W1900 El Manual Del Propietario página 14

Using the ANT/Cable (Coaxial) Connector
1
Turn off the TV display and unplug the power cord.
2
Connect the coaxial cable to the ANT/Cable connector of the TV display.
3
Plug in the power cord for the TV display and turn on the TV display.
4
Enter the on-screen-display (OSD) and select TV. For additional information about the Input
Select menu, see page 24.
Using the Composite Connector
1
Turn off the TV display and unplug the power cord.
2
Connect your device including the audio cables.
3
Plug in the power cords for the TV display and devices and turn them on.
4
Enter the OSD and select the AV1 (Composite). For additional information about the Input
Select menu, see page 24.
14
Setting Up Your TV Display
All manuals and user guides at all-guides.com