Channel Setup; Sleep Timer; Osd Setup - Dell W1900 El Manual Del Propietario

FILE LOCATION: C:\Gama\Dell_Compal\OM Update\Target\ML\W1701_1900e41.fm

Channel Setup

Sleep Timer

Sleep Timer allows you to select an increment of time after which the TV display turns off
automatically. You can select from 10 minutes to 3 hours.

OSD Setup

and volume decrease button simultaneously.
If you are using the DVI connector, you may need to verify the following settings:
Source — The default setting is Auto. The T V automatically detects if a computer (PC) or video
device is being used. If the image does not display correctly, you can select the source, PC or
Video, depending on the device you are using.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 1 / 2 5 / 0 4 – F O R P R O O F O N LY
28
Using the On-Screen Display
All manuals and user guides at all-guides.com
OSD setup allows you to adjust the appearance
of the OSD, to change the language of the OSD
(see "Selecting Your OSD Language" on page 24)
and to restore factory settings.
Use OSD Hold Time to increase or decrease the
amount of time the OSD appears. The maximum
amount of time is 60 seconds.
In the Setup menu you can select TV Button lock to
lock the OSD and the side panel buttons. When this
option is enabled, only the power button functions. To
unlock the OSD and side panel buttons:
1. Press the Menu button on the TV.
2. While the message is on the TV, press the channel up
If you are using the ANT/Cable connector,
enter Channel Setup and select the
correct region.
A message appears stating that the TV is locked.