Options And Settings; Dab Options; Autotune; Intellitext Options - PURE Elan II Manual De Instrucciones

Options and settings

Press the Menu button to access the options menu, rotate the Tune dial to scroll through and
change the options and push to select.

DAB options

Autotune

Scans all DAB Band III frequencies for stations, automatically adds any new stations found to the
station list and removes inactive stations. To stop an Autotune press Menu.

Intellitext options

Select 'Intellitext' and use the Tune dial to access the following options for managing Intellitext
messages:
Set timeout Choose to delete old Intellitext messages after 1 week (default) or 1 day.
Clear all Delete all stored Intellitext messages immediately.

FM options

FM tuning mode
Seek When you rotate the Tune dial, the radio tunes to the next station with a good signal.
Manual When you rotate the Tune dial, the radio tunes up or down in steps of 0.05 MHz.
FM stereo mode
Choose from Stereo (default) or Mono. Mono may improve clarity where stereo signals are weak.

General options

Backlight

Timed The backlight turns on for 7 seconds when any button is pressed (default).
Off The backlight does not switch on.
On The backlight is always on when the radio is on.

Audio

Push the Tune dial to select, then rotate to adjust the treble or bass and push to confirm.
Treble Adjust the treble between -5 (minimal treble), and 5 (high treble).
Bass Adjust the bass between -5 (minimal bass),and 5 (maximum bass).

Clock

The clock will automatically set itself and also update for GMT/BST clock changes. However, if you
cannot receive a DAB signal, the time and date can be manually set by selecting Set Clock from
the options menu.
9
Options and settings
EN