Getting started
Setting up
Note: If you have a ChargePAK C6L rechargeable battery (sold separately) fit the battery BEFORE
plugging the radio in. Follow the fitting instructions supplied with the ChargePAK C6L.
A
Lift the aerial from the clip on the top of the radio and fully extend it.
Insert the connector of the supplied mains adapter into the socket on the rear of the
B
radio.
C
Plug the mains adapter into the mains supply and wait for the radio to switch on.
Wait for Élan II to complete an Autotune, which finds all available DAB stations (this
takes about a minute). When the Autotune is complete, a station will be selected.
2
Getting started
C
(See page 10)
1
A
B