Energy Saving; Software Upgrade; Using A Chargepak - PURE Elan II Manual De Instrucciones

Energy saving

Élan II is part of the PURE EcoPlus product family, designed and manufactured to minimize power
consumption when the unit is switched on and to use less than 1 Watt in standby. One way this
low power consumption is enabled is by not collecting and storing Intellitext messages when the
unit is in standby. Two options are available:
On (default) Élan II updates the Intellitext data when you tune to a station that broadcasts
Intellitext. Intellitext data is not collected in standby.
Off Élan II collects Intellitext data in standby from the last station you used to view
Intellitext. This increases standby power consumption.
Note: If you fit the optional ChargePAK C6L or 6 x 'C' cell batteries (see below), your radio will
switch off when you press the Standby button and not enter standby, as long as it is not
connected to mains power.

Software upgrade

Software updates for your Élan II may be made available in the future. If you register your product
and include a valid e-mail address you will receive notification of software updates (register at
www.pure.com/register). Available software updates* are also listed at http://support.pure.com
To upgrade your radio
1. Press and hold the Menu button for three seconds to access the maintenance menu.
2. Select 'Upgrade' and follow the instructions provided with the upgrade software.
Reset your radio
Resetting your radio removes all presets, clears the station list and resets all options to defaults.
1. Press and hold the Menu button for three seconds to access the software menu.
2. Rotate the Tune dial to choose 'Factory Reset' and push the dial to confirm the reset.

Using a ChargePAK

PURE ChargePAK C6L is a rechargeable battery pack which plugs into the socket in the radio's
battery compartment. Whenever your radio is connected to a mains supply the ChargePAK will
charge up and the battery icon on screen will animate. When the ChargePAK is fully charged the
battery icon will disappear.
You can also use 6 'C' cell batteries to power Élan II. Fit them according to the diagram inside the
battery compartment.
Note Élan II can only be powered with a ChargePAK C6L. Do not use any other ChargePAK
model. Carefully follow the separate fitting instructions that are supplied with the
ChargePAK C6L.
To purchase a PURE ChargePAK C6L, contact your nearest PURE dealer, visit the shop on our
website at www.pure.com or call the PURE order line on
*Requires a PC with internet access running Windows XP or Vista and a suitable USB cable (not included).
10
Options and settings
™
+44 (0)845 148 9001
.