Breville BJE200XL Manual De Instrucciones página 5

Assembling your Breville Juice Fountain
Step 4
Place the juicer cover over the stainless steel filter and
integrated pulp container. The juicer cover ridges
should align with the small plastic wings on the
integrated pulp container. Lower into position.
4
The juicing cover can be positioned in either of
the plastic wings on the integrated pulp container.
Note
8
All manuals and user guides at all-guides.com
continued
Step 5
Raise the safety locking arm up and lock into the two
grooves on either side of the juicer cover. The safety
locking arm should now be in a vertical position and
locked into place on top of the juicer cover.
5a
5b
Step 6
Slide the food pusher down the feed chute by
aligning one of the grooves in the food pusher with
the small bump on the inside of the top of the feed
chute. Continue to slide the food pusher down the
feed chute.
FOOD PUSHER
GROOVE
SMALL
BUMP INSIDE
FEED TUBE
Step 7
Place the juice jug provided sideways under the
spout of the Juice Fountain. A graphic on the lid
shows where the juicer spout is to be placed. Note
the jug is designed to clip in under the spout to give
it a fixed location.
7
A glass could also be used to collect the juice,
but using the jug and lid is recommended to
avoid any splatter.
Note
9