easyGO camo Manual Del Usuario página 16

ELEMENTS OF THE CHILD CAR SEAT
1.Headrest
2.Armrest
3.Lever releasing ISOFIX connectors/
Backrest recline adjustment
4.Headrest adjustment lever
5.Shoulder strap guide
6.Seat shell
7.Lap strap guide
8.Backrest recline lock
9.ISOFIX connector release button
10.ISOFIX connector
INSTRUCTION MANUAL
CAR SEAT INSTALLATION
WARNING! This seat can be installed only
in passenger seats facing forwards.
WARNING! Never install the seat in a
passenger seat equipped with a front
airbag due to the risk of serious injury or
even death.
1.Seat installation for group II (children
weighing 15 -25 kg) and group III
(children weighing 22 – 36 kg) with
3-point car seat belt or simultaneously
with ISOFIX system.
WARNING! Always install the seat with a
3-point car seat belt. Never install it with
ISOFIX connectors alone as they are only
for additional stability. You can install the
seat with a 3-point car seat belt alone
EN
without ISOFIX connectors.
To pull out the ISOFIX connectors, pull the
lever in the front part of the base (fig. 1)
and simultaneously pull out the backrest
adjustment block (fig. 2). Turn the ISOFIX
connectors by 180 to have them facing
backwards (fig. 3). Press the connectors
to the car seat buckles and push the seat
to the passenger seat. You should hear a
characteristic "click" when done properly
(fig. 4). If you are only using a 3-point car
seat belt, the ISOFIX connectors should
be hidden.
Lead the shoulder strap through the
shoulder strap guide under the seat's
headrest and the lap strap under the
armrest (fig. 5). Place your child in the
seat and lock the belt in the appropriate
buckle (fig. 6, 7).
Adjust the backrest and headrest height
by pulling the lever behind the seat's
headrest (fig. 8). Adjust the height to
have the shoulder strap running halfway
between the child's shoulders and neck
(fig. 9). Make sure that the shoulder strap
is running through the green zone marked
in the picture (fig. 10). Make sure that
the lap strap is running under the seat's
armrests (fig. 11).
2.Backrest recline adjustment.
Pull the backrest recline adjustment lever
in the front part of the base (fig. 12) and
simultaneously pull out the backrest
adjustment block (fig. 13). When the
backrest block is all the way out, push
the seat into the passenger seat and the
16