7. Tighten all 7/16-14 Gr5 fasteners with torque wrench to 50 Lb.-Ft.
( 68 N*M).
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
9. Re-install Panels – Reinstall the panels removed in step 1. The push
pins removed on the exhaust side can be reinstall in reverse if needed.
©2017 Horizon Global Americas Inc. - Printed in Mexico
8. Raise muffler – Raise muffler back into position and reattach rubber
hangers, (2) per side and (1) in the middle.
Sheet 6 of 18
24968NP
09-18-17
Rev. A