Horizon Global 76183 Instrucciones De Instalación página 4

1. Remove fascia – (a) Using T25 torx bit, remove (4) screws from rear bottom fascia.
(b) Using T25 torx bit and 10 mm socket, remove (1) screw and (1) plastic flange nut from wheel well liner, both sides.
(c) Using plastic trim tools, remove the lower part of wheel well trim by unclipping the tabs from fascia and gently
pulling it outward, both sides.
©2017 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 30 76183NP 07-19-17 Rev. A