Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
1. Remove fascia - (g) Remove driver side interior panel. Unclip (2) wiring harness if present. Behind insulation material, using 10 mm socket,
remove (1) flange nut bumper fascia stud inside the compartment. Repeat same steps on passenger side but DO NOT remove any wiring harness.
Driver side
Passenger side
©2017 Horizon Global™ Corp - Printed in Mexico
Sheet 7 of 30
76183NP
07-19-17
Rev. A
Publicidad
Tabla de contenido
