Installation And Commissioning - SOMFY io filaire Instrucciones

INSTALLATION AND COMMISSIONING

1
O F F
Switch off the power supply
before starting to install the
io thermostat.
4
Connect the thermostat's power supply module cables to
the power supply cables leading from the recess box, using
an appropriate connector.
6
Feed the thermostat's power supply module through the
orifice on the thermostat's rear panel.
2
Unclip the front panel from
the rear panel by pressing
on the pressure point.
3
Remove the power
supply module from the
thermostat's front panel.
5
Unscrew the protective
housing.
7
Feed the boiler control
cables (NO / COM) through
the rear panel.
19