Section 1 Introduction And Safety; Introduction; Safety Rules; Safety Symbols And Meanings - Generac G0071260 El Manual Del Propietario

Introduction and Safety

Section 1 Introduction and Safety

Introduction

WARNING
Consult Manual. Read and understand manual
completely before using product. Failure to
completely understand manual and product
could result in death or serious injury.
Thank you for purchasing a Generac Power
Systems Inc. product. This unit has been
designed to provide high performance, effi-
cient operation, and years of use when main-
tained properly.
Read this manual thoroughly and understand
all of the instructions, cautions, and warnings
before using this equipment. If any section of
the manual is not understood, contact your
nearest Independent Authorized
Dealer (IASD) or contact Generac Customer
Service at 1-888-GENERAC
3722), or www.generac.com
tions or concerns.
The owner is responsible for proper mainte-
nance and safe use of the equipment. Before
operating, servicing or storing this chemical
pump:
• Study all warnings in this manual and on
the product carefully.
• Become familiar with this manual and the
unit before use.
• Refer to the Assembly
ual for instructions on final assembly proce-
dures. Follow the instructions completely.
Save these instructions for future reference.
ALWAYS supply this manual to any individual
that will use this machine.
The information in this manual is accurate
based on products produced at the time of
publication. The manufacturer reserves the
right to make technical updates, corrections,
and product revisions at any time without
notice.

Safety Rules

The manufacturer cannot anticipate every
possible circumstance that might involve a
hazard. The warnings in this manual, and on
tags and decals affixed to the equipment are,
therefore, not all inclusive. If using a proce-
dure, work method or operating technique that
the manufacturer does not specifically recom-
mend, verify that it is safe for others. Also
make sure the procedure, work method or
operating technique utilized does not render
the equipment unsafe.
Throughout this publication, and on tags and
decals affixed to the chemical pump, DAN-
GER, WARNING, CAUTION and NOTE
blocks are used to alert personnel to special
instructions about a particular operation that
may be hazardous if performed incorrectly or
carelessly. Observe them carefully. Their defi-
nitions are as follows:
Owner's Manual for Chemical Pump
(000100a)
Service
(1-888-436-
with any ques-
section of the man-
DANGER
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
NOTE: Notes contain additional information
important to a procedure and will be found
within the regular text of this manual.
These safety warnings cannot eliminate the
hazards that they indicate. Common sense
and strict compliance with the special instruc-
tions while performing the action or service
are essential to preventing accidents.

Safety Symbols and Meanings

DANGER
Asphyxiation. Running engines produce
carbon monoxide, a colorless, odorless,
poisonous gas. Carbon monoxide, if not
avoided, will result in death or serious injury.
DANGER
Electrocution. Water contact with a power
source, if not avoided, will result in death
or serious injury.
DANGER
Explosion and Fire. Fuel and vapors are
extremely flammable and explosive. Add fuel
in a well ventilated area. Keep fire and spark
away. Failure to do so will result in death
or serious injury.
DANGER
Risk of fire. Allow fuel spills to completely dry
before starting engine. Failure to do so will
result in death or serious injury.
(000001)
(000002)
(000003)
(000103)
(000104)
(000105)
(000174)
1