Lotus SmarTime 50017/1 Manual De Usuario página 11

2.9 Menu style
There are 2 menu style options: the rotating
menu and list icon menu.
2.10 Settings
1) There are 6 languages available. The lan-
guage of the watch is governed by the lan-
guage the connected phone is set up for.
2) Slide right / left to select the watch DIAL or
download DIAL via the APP.
3) Display lit time, there are 5 seconds / 10
seconds / 15 seconds / 20 seconds / 30 sec-
onds for optional.
4) Vibration intensity: there are three vibra-
tion levels.
5) Factory reset, click "√" to reset the watch
and click "X" to cancel the factory reset.
3. Connect to the APP
3.1 Download and install the APP
Scan the following QR CODE to download
and install the APP
• Android Google play search" LOTUS Smar-
time" and install the following APP
• iOS: Apple store search" LOTUS Smartime"
and install the following APP
3.2 Pairing via Bluetooth
3.2.1 Disconnect Bluetooth status:
Bluetooth is activated and visible once the
watch is powered on. Open the APP, enter
into the Device>>Connect device. The APP
starts scanning for the device, select "Lotus
S8". Enable the permissions as requested by
the APP.
3.2.2 Connected APP status:
Time sync: The correct time will synchro-
nize from the phone once connected.
3.2.3 Connect the Audio Bluetooth
Slide from up to down enter into the shortcut
interface, click the icon to open the Audio
Bluetooth in the watch. Then go to the Blue-
tooth settings on the phone, find the corre-
sponding Bluetooth name to connect.
3.3 Find device
Connect the watch with the APP. Click "Find
Watch" to find the device, the screen of the
watch will light up and vibrate.
3.4 Camera
Click "Take a photo" in the APP to activate the
remote camera in the watch. Click the button
on the phone screen to take a photo. All pho-
tos will be saved to the phone automatically.
3.5 Data synchronization
When connecting the watch with the APP data
will synchronize to the APP automatically.
3.6 Tilt to wake the screen
Put the watch on your wrist and turn on the
"Tilt to wake" function in the APP. The display
will light up automatically when you tilt your
wrist.
3.7 Do not disturb mode
In Device/ More you can find the Do not dis-
turb mode. You can set the start and end
times. There are no incoming calls or notifi-
cations during this period.
3.8 Alarm
Find this function in
vice>>more>>Alarm setting, set starting,
ending time, repeat times, repeating date,
start alarm and close alarm.
3.9 Sedentary reminder
In Device/ More you can find the Sedentary
reminder. Set start and end time, days, re-
minder frequency and sedentary threshold.
Switch on and off saved reminder settings.
3.10 Drink water reminder
In Device/ More you find the Drink water re-
minder, set start and end time and reminder
frequency. Switch on and off saved reminder
settings.
the APP>>De-
11 11