Matco Tools TR45KIT Manual Del Usuario página 2

INSTRUCTIONS:
1
2
2. Prepare Heavy-Duty Steel T-handle Insert Tool for insertion by first dipping the tip into the lubricant.
2-1. Next insert the tire repair string (tire plug) through the hole in the installer tool.
2-2. Make sure that the tire repair string (tire plug) is fairly well centered in the shaft prior to installation.
3.
5. Air tire to its correct tire pressure and check that the puncture is sealed and not leaking.
MODEL:
TR45KIT
1. Insert the Heavy-Duty Steel T-handle Spiral
Probe Reamer into the punctured tread at a
slight angle then straighten the reamer and
push the tapered shaft in and out of the hole
several times to expand and enlarge the
broken steel cord.
2-1
3. Insert the tire repair
string (tire plug) into
the hole and push
straight down on the
insert tool handle till
the ends of the tire
repair string (tire plug)
are sticking out of
the tire 1/2" to 1"
(13-25mm).
Page 2
1501009-14
Product Type:
45 PIECE TIRE REPAIR TOOL KIT
2-2
4.
4. Pull the Heavy-Duty
Steel T-handle Insert
Tool straight out of
the hole till the tip is
just even with the
tire tread then cut
the exposed tire
plug ends just
slightly above the
tread and remove
the installation tool.