Uline H-8314 Instrucciones De Ensamble página 2

2. Attach back panel flange to back panel using two
bolts and nuts. Insert plastic grommet into hole.
(See Figure 2)
Figure 2
3. Attach back panel and side panels to cart with
corner brackets. Insert bolts through outside of panels
into corner brackets and tighten with nuts.
(See Figure 3)
NOTE: Flanges on back and side panels should
hook around the lip on bottom shelf of cart.
Figure 3
PAGE 2 OF 9
ASSEMBLY INSTRUCTIONS CONTINUED
4. Attach cabinet door and frame set to cart by
attaching corner brackets to cabinet door and frame
set and side panels. Insert bolts through outside of
panels into corner brackets and tighten with nuts.
(See Figure 4)
Figure 4
5. Attach top shelf to cart by inserting supports into
underside of top shelf. Secure with four screws.
(See Figure 5)
NOTE: Attach handle side of top to the left side
panel with notch.
NOTE: Back panel flange should go on inside
of top shelf.
Figure 5
0321 IH-8314