Kidco Architectural Serie Guia Del Usuario página 2

Important Information
FOLLOW THESE INSTRUCTIONS
ENG
CAREFULLY AND KEEP THEM FOR
FUTURE REFERENCE
Extension Placement Guide
Extensions must be added as shown.
Extension Placement Guide for Metro Gateway (Model G170):
{
Included with gate
{
1-G170-5.5 Kit
{
2-G170-5.5 Kits
Each end may have no more than 3 extensions.
Installation
Housings, bars and square extension tubes
1
(5 / ") from gate may be needed. Depending on
8
how many extensions are being added, insert
appropriate square extension tubes (H or I, on
page 5) into gate ends. Connect the bar (G) to one
upper extension housing (E) and one lower exten-
sion housing (F).
2
31 ½" – 34 ½"
34 ½" – 37"
37" – 40"
40" – 42 ½"
42 ½" – 45"
45" – 47 ½"
Gate + 1 extension
Gate + 2 extensions
Gate + 3 extensions
Gate + 4 extensions
Gate + 5 extensions
Gate + 6 extensions
Push assembly over extension tubes. There should
be no metal showing from extension tubes. It may
be necessary to apply pressure to tubes to ensure
they are fully inserted into gate ends. Slide spind-
les (B and C) into extension tubes. See Metro
Gateway (Model G170) user guide to complete
installation.
-1 on one end
-1 on each end
-2 on one end; 1 on other end
-3 on one end; 1 on other end
-3 on one end; 2 on other end
-3 on each end