English - DeWalt D51823 Manual Del Usuario

NAILER D51823/D51845
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical data
Sound pressure (L ) dB(A) < 92
pA
Acoustic power (L ) dB(A) < 105
WA
Hand/arm weighted vibration m/s
Recommended operating
pressure bar 4.8 - 8.3
Max. operating pressure bar 8.3
Air consumption per shot
Actuating mode
Magazine angle
Fasteners
type
length mm 50 - 90
shank diameter mm 2.9 - 3.3
angle
Weight
1)
This value is a tool-related characteristic value and
does not represent the infl uence to the hand-arm-
system when using the tool. The infl uence to the
hand-arm-system when using the tool will for example
depend on the gripping force, the contact pressure
force, the working direction, the adjustment of energy
supply, the workpiece and the workpiece support.
EC-Declaration of conformity
D51823/D51845
D WALT declares that these tools have been
E
designed in compliance with:
98/37/EC, EN 792-13, EN 12549, EN 12096
For more information, please contact D
address below, or refer to the back of the manual.
Director Engineering and Product Development
Horst Großmann
D51823 D51845
D
< 92
D-65510, Idstein, Germany
< 105
2 3.2 1) 3.2 1)
Safety instructions
When using tools, always observe the safety
4.8 - 8.3
regulations applicable in your country to reduce
8.3
the risk of personal injury. Read the following safety
l 2.04 2.04
instructions before attempting to operate this
(at 6.9 bar) (at 6.9 bar)
product.
contact contact
Keep these instructions in a safe place!
actuating actuating
31° 20°
General
clipped full round
head head
50 - 90
2.9 - 3.8
31°-34° 20°-22°
kg 3.4 3.45
WALT at the
E
WALT, Richard-Klinger-Straße 40,
E
1 Keep work area clean
Cluttered areas and benches can cause accidents.
2 Consider work area environment
Do not expose tools to humidity. Keep work
area well lit. Do not use tools in the presence of
fl ammable liquids or gases.
3 Keep children away
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
4 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
5 Dress properly
Do not wear loose clothing or jewellery. They
can be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
6 Do not overreach
Keep proper footing and balance at all times.
7 Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
E N G L I S H
21