Introduction; General Description; Block Diagram - Shimano SWAN-1 Manual Del Usuario

8 May 2012 Rev.E
SWAN-1
SHIMANO INC. Confidential

Introduction

This document describes the system operation of SWAN-1 –ANT module, as well as driver installation and
the use of control software.

General description

SWAN-1 is an ANT module which has UART interface. This module can support a range of +1.9V ~ +3.6V
power supply and regulated in main chip, nRF24AP2. A reference clock is used in the device, which is of
16MHz.

Block diagram

SHIMANO INC.
3/11