Shimano SWAN-1 Manual Del Usuario página 6

8 May 2012 Rev.E
SWAN-1
SHIMANO INC. Confidential
3. Communication
a. Connect EVB (TX) and PC by USB cable. Run ANTware. Click and open right window.
b. Type in "512" and click "Set Message Period"
c. Set frequency and click "Set Radio Frequency".
d. Click "Auto-Open".
e. Connect EVB (RX) and PC by USB cable. Run another ANTware. Click and open right
window
f. RX - Check "Slave (Receive)".
g. Type in "512" instead of 8192 and click "Set Message Period"
h. Set frequency and click "Set Radio Frequency".
i. Click "Auto-Open".
j You can see received data in window.
SHIMANO INC.
6/11