Descargar Imprimir esta página

Topaz CMB150SM Instrucciones De Instalación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

E464668
E465069
Kit Includes: 1-Box/Bracket, 1-Ground Screw, 2-#10-32 Mounting Screws, 1-Cover, 1-NM Cable Connector, 2-Wood Screws
WARNING:
Turn off power at main fuse/breaker box before beginning installation.
Wiring must meet the National Electrical Code.
This Ceiling Fan & Fixture Support meets or exceeds the requirements of the National Electrical
Code and must be used with hardware supplied to mount outlet box and fan or fixture bracket.
Only use #10 screws to support a ceiling fan. #8 screws are acceptable for fixtures. Intended for
1/2" sheetrock. Included Connector for use with Nonmetallic Cable (type N).
PRODUCT RATINGS
Fan Rating (lbs)
70
Step 1:
See Figure 1
Pull wire into the electrical box
through the connector provided.
Step 2:
See Figure 2
Mount the electrical box to joist with
the wood screws provided. Make
sure to set the face of the electrical
box flush with the finished surface
for 1/2" sheetrock.
Step 3:
See Figure 3
Slide the mounting selectors to the
appropriate position. Use #8 for
fixtures and #10 for fans.
Step 4:
Follow the installation instructions
provided with the fan or fixture.
Ceiling Fan & Fixture Support
Fixture Rating (lbs)
150
Installation Instructions
CMB150SM, CMB218SM
FIXTURES
Model No.:
Figure 1
Figure 2
FANS
Figure 3

Publicidad

loading

Resumen de contenidos para Topaz CMB150SM

  • Página 1 Installation Instructions Ceiling Fan & Fixture Support Model No.: CMB150SM, CMB218SM E464668 E465069 Kit Includes: 1-Box/Bracket, 1-Ground Screw, 2-#10-32 Mounting Screws, 1-Cover, 1-NM Cable Connector, 2-Wood Screws WARNING: Turn off power at main fuse/breaker box before beginning installation. Wiring must meet the National Electrical Code.
  • Página 2 Instrucciones de instalación Ventilador de Techo y Accesorio de Soporte N.° de Cat.: CMB150SM, CMB218SM E464668 E465069 Kit Incluye: 1-Caja/Soporte, 1-Tornillo de tierra, 2-#10-32 Tornillos de fijación, 1-Cubierta, 1-Conector de cable NM, 2-Tornillos para madera ADVERTENCIA: Desconecte la energía en la caja de fusibles / disyuntor antes de comenzar la instalación.

Este manual también es adecuado para:

Cmb218sm