SATA 05233 Manual De Instrucciones página 2

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
177mm
Product Function Description:
Item
Name
LED
Main
SST20-
a
light
10W
Side
b
COB LED
light
Main
c
light
/
button
Side
d
light
/
button
Figure3
Figure 4
Product accessories:
0.8M USB Charging line.
Points for attention:
1)Batteries are fully charged when they leave the factory. Please be fully charged before the first use. Make sure that the LED lamp is in non-work - ing state when charging.
2) When charging, the power indicator shows that the red light enters the normal charging, and the power indicator shows the green light when it is full.
3)If not used for a long time, please keep the battery fully charged once for 6 months to maintain battery performance.
4)Please use the specified parameter adapter and USB charging line for charging, otherwise it may damage the product and endan ger personal safety.
5)The service time of the product is the test data of standard batteries at room temperature (20 ° C) when the initial performance is fully charged.
6)When charging, the charging interface is opened. Avoid charging in the rain, sauna, shower room and other environments where the product can easily get into the water.
Operating environment:
1)This product is recommended to use at temperatures of 0-20 ° C, limit-10-40 ° C, exceeding the limit temperature will reduce the service life of the product,
and may damage the product.
2) The product should be far away from heat source and should not be used in corrosive gases, corrosive liquids and high tempera ture environment.
3) The waterproof grade of this product is IPX4. It can be operated in a suitable rainy environment. Do not immerse in water.
Warning:
1 ) Do not look directly at the light source, otherwise it will cause damage to the eyes
2) It is forbidden to use in heating source or corrosive or acidic environment, otherwise it may cause short circuit danger and damage product and personal safety
05233
e
d
c
a
b
Function
Opening Mode
Description
Turn on the
Start button C
main lights
Start button d
Turn on the
side lights
Start button d
Press
Open main light
Open main
Long Press
light COB LED
Press
Open side light
Turn on side light endless
Long Press
dimming
f
18650 rechargeable
lithium battery
Product part (Picture one) :
Figure1
a. Electricity indicator light
b. Main light
c. Main light button
d. Side light button
e. I/O interface
f. Side light
Figure2
Hidden Function
Start switch first gear high brightness
Start switch second gear off
Start switch first gear high brightness
Start switch second gear off
/
/
Side light
COB-LED
Recharge
duration 4h
中文
EN
DE
RU
KO
Lumen
700
/
120
/
/
/
Top light: 700/1.5
Main light
SST20-10W
Side light: 120/6.5
Discharge duration
IPX4
1.5-24h
PT
JA
ES
Duration of Endurance
(Full Power State)
1.5hrs
/
6.5hrs
/
/
1.5-2Alirs
/
1.5-24tirs
3.7V
2200mA

Publicidad

Tabla de contenido
loading

Tabla de contenido