INVENTOR CLCO290-09 Manual De Usuario página 13

|Installation
Type 2: Wall Installation (optional)
1.Cut a 125mm (4.9inch) hole into the wall for
the Wall Exhaust Adaptor B. 2.Secure the
Wall Exhaust Adaptor B to the wall using the
four Anchors and Screws provided in the kit.
3.Connect the Exhaust Hose Assembly (with
Wall Exhaust Adaptor A) to the Wall Exhaust
Adaptor B
Expansion anchor
position
Wall Exhaust
Adaptor B
Adaptor cap
Note: To ensure proper function, DO NOT
overextend or bend the hose. Make sure that
there is no obstacle around the air outlet of the
exhaust hose (in the range of 500mm) in order
to the exhaust system works properly. All the
illustrations in this manual are for explanation
purpose only.
Your air conditioner may be slightly different.
The actual shape shall prevail.
Note: Cover the hole
using the adaptor cap
when not in use.
max 120cm or 47 inch
min 30cm or 12 inch
13