Maintenance - INVENTOR CLCO290-09 Manual De Usuario

Ocultar thumbs Ver también para CLCO290-09:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 129

|Maintenance

WARNING:
-Be sure to unplug the unit before cleaning
or servicing
-DO NOT use fllammable liquids or chemicals
to clean the unit.
-Do not wash the unit directly under a tap or
using a hose as it may cause electrical shock.
-DO NOT operate this unit if the power cable
is damaged in any way. If the power cord is
damaged it must be replaced from the
product manufacturer and never repaired.
Clean the Air Filter
Air filter
(take out)
Remove the air filter
CAUTION
DO NOT operate the unit without filter
because dirt and lint will clog it and reduce
performance. Maintenance Tips
- Clean the air filter every two weeks to
prevent inferior fan operation due to dust.
-The water collection tray must be drained
immediately in the event that the error P1
appears on the digital control panel, and
also before storage to prevent the
possibility of mold growth.
-In households with animals, you will have
to periodically wipe down
the grill to prevent blocked airfllow due
to animal hair.
EN
Clean the Unit
Use a damp lint-free cloth to clean the unit
enclosure. Dry with a clean and lint free
cloth cloth.
Store the unit when not in use
-Drain the unit's water collection tray as per
the instructions in the following section.
-Operate the device on FAN mode for 12
hours in a warm room to dry and prevent
the possibility of mold growth.
- Power off the unit and unplug.
-Clean the air filter as per the instructions in
the previous section. Reinstall the clean and
dry filter before storing.
-Batteries from the remote control should
be removed.
-Store in a cool, shady area. Any exposure
directly to sunlight or in extreme heat situations
may minimize the lifespan of this device.
NOTE: The main chassis and front of the
unit may be cleaned with by using a lint-free
cloth and soapy water (using a mild
detergent) Dry with a clean cloth. The use of
harsh cleansers, or the waxing and polishing
of the unit is strongly not advised. When
cleaning the digital control panel be certain
the cloth is dry as any water around the
controls may cause damage to the unit.
17

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Clco290-09bs

Tabla de contenido