DeLOCK 87665 Manual Del Usuario página 2

English
Description
This splitter by Delock receives a DisplayPort signal from a PC or laptop and
splits it to two connected displays. Thereby one DisplayPort connection can be
used to operate two DisplayPort monitors. Both outputs are dual-mode capable
(DP++), so that HDMI or DVI monitors can be connected with suitable adapters.
Note
The product is a Multi-Stream Transport (MST) hub and supports the extended
desktop configuration of DisplayPort 1.2. When Mac OS is used, the same
image is displayed on both ports (mirrored), it is not possible to use both ports
independently of each other.
Specification
• Connectors:
Input: 1 x DisplayPort 20 pin male
Output: 2 x DisplayPort 20 pin female
• Chipset: STDP4320
• DisplayPort 1.2a specification
• Active converter, Single- / Multi-Stream Transport Hub (SST / MST)
• Functions: Mirrored or Extended (Windows only)
• Maximum resolution (depending on the system and the connected hardware):
DisplayPort 1.1 or 1.2 Single Stream Transport (SST):
up to 1920 x 1080 @ 60 Hz (mirror)
DisplayPort 1.2 Multi-Stream Transport (MST):
up to 2560 x 1440 @ 60 Hz or 3840 x 2160 @ 30 Hz (mirror or extended)
• DisplayPort output supports Dual Mode DP++
• Supports Eyefinity / Single Large Surface (SLS)
• Audio input formats: 7.1 channel up to 192 kHz sample rate
• Metal housing
• Colour: black
• Cable length without connectors: ca. 30 cm
• Dimensions (LxWxH): ca. 100 x 67 x 23 mm
System requirements
• Mac OS 10.12 or above
• Windows 7/7-64/8.1/8.1-64/10/10-64
• A free DisplayPort female
-2-