Publicidad
Idiomas disponibles
Idiomas disponibles
CF 98132
FAN INSTALATION
1. Assemble the blades to the body using the scr
2. Slide the rod down through the pin and insert the wires through the tube.
3. Mount the mounting bracket onto outlet box by the screws and washers.
4. Hang the ball joint and the fan onto the bracket. Make sure the guide pin of bracket is tted
ball joint. Insert the remote control receiver between the bracket and the downrod, and the sensor as
shown.
5. Connect the power supply cables to the ceiling support strip, respecting their corresponding polarity
(neutral - neutral, phase - phase and earth - ground).
6. Attach the bowl to the ceiling support, aligning the side holes and secure it by tightening the screws
OPERATING THE FAN
- Select the fan speed by pressing the speed control button on the remote control transmitter
HI: High Speed
- Program the fan for 1, 2, 4 or 8 hours by pressing the corresponding button and the fan will stop
working after the selected time has elapsed.
MED : Medium Speed LOW
ews and washers.
: Low Speed OFF :
into slot of
O
:
10
Publicidad
