Product Parameters; Operating Conditions - SATA 90767 Manual De Instrucciones

Multifunctional Spotlight:
Product features and operating instructions:
1 ） Multifunctional spotlight for various applications.
2） Press and hold the switch to enter stepless dimming settings. When the light flashes twice, it indicates the highest or low est intensity has been set.
3） Fore-end holder （ CREE XML light source） provides 4-mode lighting: low, high, fast-flash, and SOS.
4） Front holder （ COB light source） provides 4-mode lighting: low, high, red light, and red flash.
5） Lithium-ion rechargeable battery, providing power for at most 16h lighting （fore-end low） .
6） Overcharge and over-discharge protection, extending battery service life.
7） Power of 5V 1A output from the USB port of the product can be used to charge a mobile device in emergency conditions.
8） Battery level indicator provided, convenient to check the status of battery.

Product parameters:

Fore-end lighting intensity
Fore-end beam distance
Front lighting intensity
Battery
Runtime
Recharge time
Size
Net weight
Accessories:
1 ） 5V 2A （3C） Power adapter x 1.
2） Charging cable x 1 （ 80 cm） .
3） Hand strap x 1.
Precautions:
1） The battery is not fully charged upon delivery. Before using the spotlight for the first time, be sure to fully charge it. Before charging the
LED light, make sure it is not working
2） During charging, the charging indicators flash; after charging is completed, the 4 indicators stop flashing and stay on
3） If the product is not used for a long time, keep fully charging and discharging the battery at an interval of at least 3 months to maintain
its performance
4） Always use the dedicated USB charging cable or 5V 2A adapter to charge the product

Operating conditions:

1 ） The operating temperature is recommended to be within 0 ~ 20° C, and the allowable operating temperature should be within0 ~ 40° C. Exceeding
the limit would reduce the service life of the product and damage it.
2） Keep the product away from heat sources. Do not use it in humid or dusty environment or at places where corrosive gases or liquid may exist.
3） The product is not protected against water ingress. Avoid charging or using it in the rain or a humid environment where water ingress may occur.
Warning:
1） Do not directly stare at the light source; otherwise it may cause eye damage
2） Although short-circuit protection is provided for the battery, it is still not allowed to charge the product near a heat source or in a corro
sive or acidic environment; otherwise it may result in short circuit, which would damage the product or bring risks to personal safety
This item is consumable, and is not covered under SATA lifetime warranty.
90767
中文
Front-loaded: 500LM
Beam distance: 500M
Runtime Stepless dimming
:
Fore-end: 6h（high）
Front: 3.5h（high）
500LM （high）/ 250LM （low）
800LM （high）/ 400LM （low）
18650x4 （ 3.7V）/ 8800mAh
Fore-end:6h （high）/ 16h （low） Front:3.5h （high）/ 7h （low）
232.9x104x116.4mm
EN DE RU KO
Front: 800LM
500M
6.5h
610g
PT JA ES
0.61kg