Before You Begin; Installation Options; Installation Instructions - DAYTEK Flexi-Dry Mk II Manual De Instrucciones

Tendedero retráctil
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BEFORE YOU BEGIN

Please check the carton contains all the
required parts before installing the clothesline.
Your carton should contain the following:
1. Daytek Flexi-Dry Retractable Clothesline x 1
2. Wall to Wall fixing pack including detailed
installation instructions x 1
(Fixing pack provided is for installing to bricks and
timber walls only. For fixing to other type of wall
structures consult your local hardware specialist)

INSTALLATION OPTIONS

Wall to Wall – All fixing required included inside pack

INSTALLATION INSTRUCTIONS

Important: Recommended installation height of line
from ground level is USER HEIGHT + 100mm (+4
inches. Maximum wall to wall distance of 15 meters
(49 feet). Ensure selected position has a clearance of
0.5 - 1 meter (1.5 - 3 feet) minimum on either side.
1. Mark recommended
installation height,
cabinet and
retaining hook
position.
CABINET
Users Height
WALL
+ 100mm
SIDE
(+4 inches)
GROUND LEVEL
Tools required for installation.
5m (16 feet) measuring tape
Pencil or marker
Hammer
Hammer Drill
Masonry drill bit (8mm or 5/16" diameter)
Screw Driver (Phillip Head)
Twist drill 2mm (5/64") diameter (optional)
For timber wall installations, follow instructions and
use 2mm (5/64") diameter to drill all mounting hole
positions and discard plastic plugs when installing
cabinet and retaining hook.
Maximum 15 meters (49 feet)
2
RETAINING
HOOK
WALL
SIDE

Publicidad

Tabla de contenido
loading

Tabla de contenido