Part 3
ELECTRICAL CONNECTIONS
2
The fourth step of the installation is to prepare the electrical connection as follows:
2. With the oven positioned directly in front of the cabinet opening, connect the flexible conduit to the electrical
loop when the oven is installed.
If used in mobile homes or new construction, or a recreational vehicle, or local codes do not permit connection
IMPORTANT NOTE
permitted on these products.
the flexible conduit must be securely attached to the conduit connector. If the flexible conduit will not fit within
the connector, do not install the oven until a connector of the proper size is obtained.
wiring. The insulation of these leads is rated at temperatures much higher than the temperature rating of
household wiring. The current carrying capacity of the conductor is governed by the wire gauge and the
temperature rating of the insulation around the wire.
All manuals and user guides at all-guides.com
5" Min
- 9 -
Junction Box
Location
22" Min for single wall oven
42" Min for double wall oven
Junction Box must be recessed
and conduit connector must be
used at Junction Box.