How To Set The Time - XD COLLECTION P328.27 Serie Manual Del Usuario

HOW TO USE:
A full charge is approximately 2,5 hours and plays continuously
6 hours.
Connect the speaker to the USB charging cable to charge.
When the LED indicator is RED, the speaker is charging.
The LED indicator goes off when the device is fully charged.
HOW TO USE THE BT FUNCTION:
If you want to pair your mobile device with the speaker, please
make sure the BT mode on your device is switched on. Switch
the power on/off button on to pair the device. After doing so
the speaker will be visible in the BT devices overview of your
device. Please select "Wireless charging time display'' to pair
your mobile device with the speaker.
USING THE WIRELESS CHARGER:
• Make sure your phone is compatible for wireless charging.
• First plug the wireless charger using the included micro USB
cable into the USB port of your wall adapter. Please note
charging speeds depends on the input power into the wireless
charger.
• Place your mobile phone on the charging pad. You can check
the charging status on the screen of your phone.
NOTE: Wireless charging option is only possible if the micro USB
cable is connected.

HOW TO SET THE TIME:

1. 2x press Clock (5) to set the time.
2. Set the hour by pressing + or –
3. Press Clock (5) again to set the minutes
4. Finish by pressing Clock(5) again
4