Ice Maker Operation - TATRA TIM.2504G.A Manual Del Usuario

INSTALLATION
Remove all packaging material before installing the machine. The product contains an ice
slider, water outlet plastic, and ice blade. If any accessory or component is missing, please
contact customer service.
Prior to using the ice maker, clean the body interior with warm water and a soft cloth.
Clean the ice cube molds with warm water and detergent. Wipe dry with a cotton soft cloth.
After the ice maker is installed in the place of operation, wait for 2 hours without starting to
equalize the pressure of the refrigeration system.
The parts inside the ice maker must be put back in place.

04. ICE MAKER OPERATION

STARTING THE ICE MAKER
After installing
connecting all utilities according to the
instructions,
1. Make sure the power is supplied in a
standard socket.
2. Open the water tap to which the
machine is connected.
3. Set the on/off button on the front
panel to ON. (When set to ON, the LED
on top will light up)
4. The ice making cycle completes
depending on the ambient and tap water
temperature.
5. To change the size of the made ice,
adjust the position of the potentiometer
in the direction of the arrow
6. The adjusting button can be accessed
by removing the front cover.
the machine and
EN
25