Dimensions And Weight - SATA 90743 Manual De Instrucciones

1. Operating methods of flashlight:
This product is in single shift lighting mode and linear constant current drive circuit, without noise and stroboflash:
1 ） Lighting mode （American ANSI/NEMA FL 1-2009 Standard）
Single shift output （ with 120 lm output outside lens and 5 h use time） .
2） Turnon of flashlight Press tail cap switch to turn on or off the flashlight .
2.Operating methods of intelligent charger:
1 ） Service power supply: AC 100-220 V with 50 Hz.
This charger is only suitable for charging No. 5 （ AA） rechargeable nickel-hydrogen battery.
2） Two-position charger: Simultaneously charge single or double No. 5 （ AA） rechargeable nickel-hydrogen battery （ batteries） .
3） Charging status indicator: Red - charging; off - fully charged.
4） Charging current and charging time:
Rated total charging current 400 mA; charging current of single battery 400 mA; charging current of each battery in double
batteries 200 mA.The capacity of standard nickel-hydrogen battery is 1,800 mAh. It takes about 10 h and 6 h respectively to fully
charge 2 batteries together and single battery .
3.Performance parameters of flashlight:
1 ） Illuminant: CREE® High-Power LED imported from America: CREE® XP-E2 series; color temperature: cool white.
2） Rated input voltage: DC 0.8 - 3.0 V.
3） Available battery: double AA No. 5 batteries - rechargeable nickel-hydrogen batteries or disposable alkaline batteries.
Note:
4500 Li-ion rechargeable battery （ 3.7 V*2） or lithium iron phosphate battery （ 3 V*2） is unavailable
4） Range: 175 m （American ANSI/NEMA FL 1-2009 Standard） .
5） Impact resistance level: Dropping resistance with the height of 1 m （American ANSI/NEMA FL 1-2009 Standard） .
6） Level of resistance to dust and water: IP67, and water logging resistance with the water depth of 1 m （American ANSI/NEMA FL 1-2009
Standard） .
4.Standard package:
Flashlight x 1: 90743.
Battery x 2: AA （No. 5） rechargeable nickel-hydrogen battery, with capacity of: 1,800 mAh.
Charger x 1: intelligent two-position nickel-hydrogen battery charger.
Hand strap x 1: high-quality hand strap preventing accidental release.

5.Dimensions and weight:

1 ） Dimensions: length 165 mm; rear cylinder diameter: Ø 25. 4 mm （standard 1" cylinder diameter） ; head cover diameter: Ø 32 mm （1.25"） .
2）Weight: 145g （including hand strap, excluding battery） .
6.Precautions:
1 ） Charger: It is only used in indoor safe environment; please remove the battery after it is fully charged; please power off the
charger after charging; do not maintain and disassemble the charger by yourself.
2） Battery: The battery may not be fully charged during delivery. The user should fully charge the battery before using it for the first
time.Please fully charge the battery at least every 6 months to maintain the performance of the battery. Only use the charger
attached, and do not use other chargers; otherwise, it will damage the product and endanger personal safety. Do not charge in a
heating source or corrosive environment; otherwise, it may cause a short circuit to damage the product and endanger personal safety.
3） Flashlight: It shall be kept away from the heating source. It shall not be used in the environment with corrosive gas, corrosive
liquid and high dust.The operating temperature and its limit are respectively recommended to be from 0° C to 20° C and from
-10° C to 40° C. The high temperature environment exceeding the limit will reduce the service life, damage the product and
endanger personal safety.
90743
中文
EN DE RU KO PT JA ES