Memory Card; Usb Connection - Toshiba Gigaframe L80 Manual Del Usuario

3. Place the Gigaframe horizontally or vertically on a stable surface, and
then keep the power connected until the battery is fully charged.
When the battery charge is running out of power, a warning message
will appear on the screen. Charge the battery as described above.
The fully charged battery usually lasts about 50 minutes, depending on
your use and settings.
Power system and plug types may vary depending on your country/
region.
Do not disassemble or modify the battery.
Connections

Memory Card:

Inserting a memory card:
1. Insert a memory card into the slot on the bottom edge of the display.
2. The Gigaframe supports SD, MMC, MS, MS Pro, xD and SDHC
memory cards.
3. A few seconds after inserting the card, the Gigaframe will begin
searching for photos in the memory card and will display them in
slideshow mode automatically.
4. Removing the memory card:
5. To remove the memory card, directly remove from the slot.

USB Connection

For Windows PC (XP & Vista)
1. The Gigaframe can be connected to a PC with the supplied USB
cable. The PC will recognize Gigaframe as a mass storage device.
2. Once the Gigaframe connects to a PC, it is not operable until it is
disconnected from the PC.
User's Manual
All manuals and user guides at all-guides.com
Gigaframe L80 / L81
EN-9