Cleaning And Maintenance; Technical Features - postQuam Italian Design IDEER-6004 Manual De Instrucciones

EN

CLEANING AND MAINTENANCE

• Before cleaning, always turn off the power and switch off the product, remove the
cutting comb (if used), wash it directly under the tap and gently brush the remaining
hair on the blade and surface with the cleaning brush provided "Fig. 7".
• When there is a stain on the body of the appliance, use a soft cloth dampened with a
little neutral detergent and wipe it off. Do not use alcohol, petrol or other chemicals to
clean the product.
• After cleaning, to obtain better performance of the blade, lubricate it if necessary, put
some drop of lubricating oil on the left, middle and right side of the blade head, and
turn the machine on several times to clean the surface of the blade head, thus keeping
it sharp and avoiding wear.
• When the hair clipper is not in use, cover the blade with a protective sleeve to prevent
damage "Fig. 8".
• If any changes, such as abnormal smell, temperature and sound, occur during loading
or use, disconnect the power supply immediately and stop using it. Contact the
appropriate service centre. Do not attempt to open the device.
Problems
Not sharp, weak rotation, less
usable times
Cannot be loaded or started
The indicator light is not on

TECHNICAL FEATURES

EN
Input power: 5V - 1A.
Charging time: 2 horas
Reasons
The blade is damaged, dirty and
the power is insufficient
The haircut or the adapter is
damaged, the switch fails and the
power is exhausted
Indicator light / circuit failure
Lithium battery: 500 mAh 3,7 V * 1
Rated power: 5 W
7
PRECISION BULLET PRECISION BULLET
Solution
Replace the blade, clean the blade
and load
Back to maintenance and after-
sales service
Return to the after-sales service
for repair