Fitting Of Holder For Remote Control - Velux VSE KLR 100 Manual Del Usuario

Fitting of holder for remote control

The remote control is provided with a wall-mounted
holder, which can be fitted anywhere in your home.
Note: Check that the remote control can operate the
relevant products from the proposed position before it is
fastened to the holder.
1
Fit the back section to the wall with the two screws sup-
plied.
2
Hook the front section onto the back section at the top,
click it into place at the bottom and fix it with a screw.
3
Place the remote control in the holder. It is secured by
means of built-in magnets.
66 VELUX
All manuals and user guides at all-guides.com
ENGLISH