Ac Power Connection - Sharp HT-SB400 Manual De Manejo

Speaker connections to TVs (continued)
HT-SB400
ENGLISH
Connecting to a TV (with Headphone socket)
If the TV/monitor has headphone socket, connect it to the
AUDIO LINE IN 2 socket on the rear of the speaker.
TV
(3.5 mm/stereo socket)
Notes:
If the TV volume is continuously in low level, the speaker will
automatically power off. Increase the TV output volume to
enjoy the sound from the speaker.
If the speaker volume is continuously in very high level, the
speaker will mute and recover after several seconds.
The information display on the sound bar system will not
display anything when increasing or decreasing the volume
level.
E-11
HT-SB400_A6_EN.fm
All manuals and user guides at all-guides.com
HEADPHONE
To HEADPHONE socket
Audio cable
(not supplied)
To AUDIO LINE
IN 2 socket
Speaker
AUDIO AUDIO RIGHT RIGHT LEFT LEFT
LINE IN 2 LINE IN 2 LINE IN 1 LINE IN 1 DC IN DC IN
2009 October 20

AC power connection

Using with the AC/DC adaptor
1
Plug the AC power lead into the AC/DC adaptor.
2
Plug the AC/DC adaptor cable into the DC INPUT
socket on the speaker.
3
Plug the AC power lead into a wall socket. The on/
stand-by indicator will turn ORANGE when AC power
is applied. The on/stand-by indicator will turn GREEN
when the system in "ON".
AC/DC Adaptor Cable
DC INPUT socket
(DC 12V)
AC power lead
3
Wall socket
(AC 100 - 240 V ~ 50/60 Hz)
Notes:
Unplug the AC/DC adaptor from the wall socket if the
speaker will not be used for a prolonged period of time.
Use only the supplied AC/DC adaptor. Using other AC/DC
adaptor may cause an electric shock or fire.
2
AUDIO AUDIO RIGHT RIGHT LEFT LEFT
LINE IN 2 LINE IN 2 LINE IN 1 LINE IN 1 DC IN DC IN
1
AC/DC Adaptor