Publicidad
assembling the highchair for stage 1
fig 2
fig 3
Insert a barrel nut into the predrilled
holes at either end of the wooden brace,
using a flat head screw driver to ensure
that the slot is horizontal. Then using
the Allen key and screws provided,
attach the wooden brace to the legs.
Please note: do not fully tighten any of
the screws yet.
Slide the smaller loop of the crotch
restraint over the metal brace that you
intend to use in the highest position.
Then using the screws provided,
attach both metal braces to the legs.
3
Publicidad
