Publicidad
assembling the highchair for stage 1
fig 8
fig 9
Insert the upper and lower back
rests into the appropriate slots at the
top of the legs. Insert a barrel nut into
each of the pre-drilled holes at either
end of the back rests. Using a flat
headed screw driver ensure that the
barrel nuts are horizontal and
use the Allen key and screws
Select the desired position and firmly
push the foot rest into the chair frame
until the front of the foot rest is level
with the front of the high chair. Please
ensure that the foot rest isn't twisted
by selecting slots of a corresponding
height. Once you are happy with the
position of the seat and foot rest please
tighten all screws, being careful not to
overtighten and damage the wood.
provided to attach both
of the back rests.
6
Publicidad
