Radio Signal (Wwvb) - lidl HG05124A-US-RX Manual De Instrucciones

The WWVB-Signal (time signal transmitter) is made up of time pulses
transmitted from one of the highest precision clocks in the world close
to Fort Collins, Colorado.
296586_1901_aur_Funk-Wetterstation_Content_US.indd 17
Insert the new batteries, type LR06, in the battery compartment
Please note the battery polarity. This is indicated in the battery
compartment.
Close the battery compartment cover. The display
light up and run a brief check of all display elements.
Alternatively, first remove the batteries from the battery compartment.
Plug the low voltage plug from the mains adapter
power socket on the main station and plug the mains adapter
31
into an easily accessible outlet. The display will permanently light
up and run a brief check of all display elements.
The outdoor temperature field
reception symbol , indicating the main station is searching for
the signal from the outdoor sensor.
If the outdoor temperature does not appear after 3 minutes, the
main station will stop searching. The animation of the reception
symbol will turn off and the outdoor temperature field will show
--._ °C and --._ %. The signal most likely cannot be received due
to structural factors, reinforced concrete walls, the brickwork being
too solid, or the distance between the units. After finding a better
location for the outdoor sensor you will need to restart reception.
Press and hold the CH button
3 seconds until the reception signal becomes animated again.
The product will automatically start receiving the outdoor sensor
signal, regardless if signal from the outdoor sensor was received
or not. The clock field
bol , indicating the receiver for the WWVB signal is starting to
receive the time.

Radio signal (WWVB)

will show an animation of the
23
on the back of the main station for
15
will show an animated radio tower sym-
24
.
16
will briefly
1
into the
30
US-EN 17
24.06.19 11:47