Merit Fitness 715T Manual Del Propietário página 6

ASSEMBLY STEP 1
HARDWARE BAG 1 CONTENTS :
WASHER (C)
15.5 mm
Qty: 4
CONSOLE MAST
CONSOLE MAST
SUPPORT TUBE
6
All manuals and user guides at all-guides.com
BOLT (A) SPRING WASHER (B)
15 mm 15.4 mm
Qty: 8 Qty: 8
ARC WASHER (D)
17 mm
Qty: 4
CONSOLE WIRE
SPRING WASHER (B)
ARC WASHER (D)
FLAT WASHER (C)
SPRING WASHER (B)
Open HARDWARE BAG 1.
A
Slide the right CONSOLE MAST down on to
B
the CONSOLE MAST SUPPORT TUBE. On
the front of the CONSOLE MAST, bolt in place
using 2 BOLTS (A), 2 SPRING WASHERS
(B), and 2 ARC WASHERS (D). On the side
of the CONSOLE MAST, bolt in place using 2
BOLTS (A), 2 SPRING WASHERS (B), and 2
FLAT WASHERS (C).
Repeat on other side.
C
BOLT (A)
On right side thread CONSOLE MAST WIRE
D
through CONSOLE MAST.
NOTE: While assembling the masts, do
not completely tighten any bolts until
the end of ASSEMBLY STEP 2. Ensure
that ALL bolts are in place and partially
threaded in before completely tightening
any ONE bolt.
BOLT (A)