Metra 99-8233B Manual Del Usuario página 4

ISO DIN head unit provisions
1. Mount the pocket to the radio brackets
with the (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Slide the head unit into the radio
brackets and secure with screws
supplied with the unit. (Figure A)
3. Mount the climate control to the radio/
pocket/bracket assembly with the
factory hardware. (Figure A)
4. Mount the radio/pocket/climate control
assembly into the dash.
5. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
6. Attach the factory panel clips to the
99-8233 radio trim panel.
7. Reassemble dash in reverse order of
disassembly using the 99-8233 radio
trim panel. Note: Snap the 99-8233
trim panel into the factory panel
before installing the whole assembly
over the radio/climate controls.
(Figure B)
Kit Assembly 99-8233B
4
(Figure A)
(Figure B)