Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
KIT COMPONENTS
• A) Radio housing • B) Radio brackets • C) Pocket • D) (1) Passenger Air Bag Light board cover • E) (2) Panel clip mounts
• F) (4) #8 x 3/8" pan-head Phillips screws • G) (7) #4 x 3/8" pan-head Phillips screws • H) (1) Air-Bag sticker (not shown)
A
Metra. The World's Best Kits.
®
Toyota Avalon
*Visit MetraOnline.com for up-to-date vehicle specific applications.
KIT FEATURES
• ISO DIN radio provision with pocket
• Painted high gloss black
B
C
F
MetraOnline.com
2013-up*
D
E
G
© COPYRIGHT 2017 METRA ELECTRONICS CORPORATION
99-8244HG
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Dash Disassembly .............................................. 2-5
Kit Preparation .......................................................6
Kit Assembly
–ISO DIN radio provision with pocket ..................7
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: 70-1761 • TYTO-02 (For models
with a JBL amp)
Antenna Adapter: 40-LX11
TOOLS REQUIRED
• Panel removal tool • Phillips screwdriver
• Socket wrench
CAUTION!
All accessories, switches, climate
controls panels, and especially air bag indicator
lights must be connected before cycling the
ignition. Also, do not remove the factory radio
with the key in the on position, or while the
vehicle is running.
REV. 11/6/17 INST99-8244HG
Publicidad
Tabla de contenido
Manuales relacionados para Metra 99-8244HG
Resumen de contenidos para Metra 99-8244HG
- Página 1 Also, do not remove the factory radio with the key in the on position, or while the vehicle is running. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 11/6/17 INST99-8244HG...
-
Página 2: Dash Disassembly
DASH DISASSEMBLY 1. Unclip and remove the a/c vent panel 3. Remove (4) 10mm bolts (2 on top and Upper bolts above the factory radio and surrounding 2 on bottom) securing the factory radio the instrument cluster. (Figure A) then unclip and remove. (Figure C,D) Tip: Start at the passenger side of the Continued on the next page panel. - Página 3 DASH DISASSEMBLY (CONT.) 4. Remove (4) small Phillips screws securing the panel clip and screw mount to the factory radio. Retain for kit assembly. (Figure E) 5. Remove (9) small Phillips screws securing the radio chassis to the main panel of the factory radio. (Figure F) Continued on the next page (Figure E) (Figure F)
- Página 4 DASH DISASSEMBLY (CONT.) 6. Remove (2) remaining Phillips screws securing the Passenger Air Bag Light board to the main factory radio panel. Retain board for kit assembly. (Figure G) 7. Remove the remaining (2) yellow panel clips and retain for kit assembly. (Figure H) Continued on the next page (Figure G)
- Página 5 DASH DISASSEMBLY (CONT.) 8. Remove (2) Phillips screws and then unclip the chrome trim around the outside of the radio/climate control assembly. Retain for kit assembly. (Figure I) 9. Remove the radio brackets and the climate control from the factory radio. Retain climate control for kit assembly.
-
Página 6: Kit Preparation
KIT PREPARATION 1. Attach the Passenger Air Bag Light board to the radio housing with the factory hardware. (Figure A) 2. Attach the Passenger Air Bag Light board cover to the radio housing panel over the Passenger Air Bag Light board using (3) of the #4 x 3/8”... -
Página 7: Kit Assembly
4. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or AXXESS. Test the radio for proper operation . 5. Reassemble the dash in reverse order of... - Página 8 Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 11/6/17 INST99-8244HG...
- Página 9 Además, no quite el radio de fábrica con la llave en la posición o de encendido ni con el vehículo funcionando. Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 11/6/17 INST99-8244HG...
-
Página 10: Desmontaje Del Tablero
DESMONTAJE DEL TABLERO 1. Desenganche y quite el panel de la 3. Quite los (4) pernos de 10mm (2 arriba y Pernos superiores rejilla de aire acondicionado de arriba 2 abajo) que sujetan el radio de fábrica, del radio de fábrica y que rodea el luego desenganche y quite. - Página 11 DESMONTAJE DEL TABLERO (CONT.) 4. Quite los (4) tornillos Phillips que sujetan el gancho del panel y atornille el soporte al radio de fábrica. Retenga para el ensamble del kit. (Figura E) 5. Quite los (9) tornillos Phillips pequeños que sujetan el chasís del radio al panel principal del radio de fábrica.
- Página 12 DESMONTAJE DEL TABLERO (CONT.) 6. Quite los (2) tornillos Phillips restantes que sujetan el tablero de la luz de la bolsa de aire del pasajero al panel de radio de fábrica principal. Retenga el tablero para el ensamble del kit. (Figura G) 7.
- Página 13 DESMONTAJE DEL TABLERO (CONT.) 8. Quite los (2) tornillos Phillips y luego desenganche la moldura cromada de alrededor del exterior del ensamble del control del radio/clima. Retenga para el ensamble del kit. (Figura I) 9. Quite los soportes del radio y el control de clima del radio de fábrica.
-
Página 14: Preparación Del Kit
PREPARACIÓN DEL KIT 1. Coloque el tablero de la luz de la bolsa de aire del pasajero en la carcasa del radio usando la tornillería de fábrica. (Figura A) 2. Coloque la cubierta del tablero de la luz de la bolsa de aire del pasajero en el panel de la carcasa del radio sobre el tablero de la luz de la bolsa de aire del pasajero con (3) de los tornillo Phillips... - Página 15 Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. (Figura A) (Figura B) 5.
- Página 16 800-354-6782 para obtener más información y avance hacia un futuro mejor. Metra recomienda técnicos con certificación del Programa de Certificación en Electrónica Móvil (Mobile Electronics Certification Program, MECP). Metra. The World’s Best Kits. MetraOnline.com ® © COPYRIGHT 2017 METRA ELECTRONICS CORPORATION REV. 11/6/17 INST99-8244HG...